3.2 STSilentLivenessDetector

- (instancetype)initWithDetectionModelPath:(NSString )detectionModelPath alignmentModelPath:(NSString )alignmentModelPath frameSelectorModelPath:(NSString )frameSelectorModelPath antiSpoofingModelPath:(NSString )antiSpoofingModelPath licensePath:(NSString *)licensePath setDelegate:(id <STSilentLivenessDetectorDelegate>)delegate;

Initialization method.

Parameter	Description
detectionModelPath	Path to DETECTION model resource
alignmentModelPath	Path to ALIGNMENT model resource
frameSelectorModelPath	Path to FRAME_SELECTOR model resource
antiSpoofingModelPath	Path to ANTI_SPOOFING model resource
faceQualityModelPath	Path of the FACE_QUALITY model resource, if you don’t need to perform face quality inspection, can pass in nil
licensePath	Path to the license file, SenseID_Liveness_Silent.lic
delegate	Callback delegate

Return value	Description
Silent liveness detector example	None

- (void)setBrowOcclusionEnable:(BOOL)enable;

Set whether to perform eyebrow occlusion detection during liveness detection, NO by default.

Parameter	Description
enable	Yes indicates eyebrow detection is turned on and No indicates eyebrow occlusion detection is turned off.

Return value	Description
None	None

- (void)setBlurryFilterEnable:(BOOL)enable threshold:(float)threshold;

Set whether to perform blurriness detection during liveness detection, NO by default. The threshold is 1.4 by default.

Parameter	Description
enable	Yes indicates blurriness detection is turned on and No indicates blurriness detection is turned off.
threshold	The threshold used to judge the blurriness. The value range is [0,5]. If the detection result score is larger than the threshold, it is considered blur. The default threshold is 1.4. When it is set to 5, it means that the blurriness detection is turned off.

Return value	Description
None	None

- (void)setIlluminationFilterEnable:(BOOL)enable darkLightThreshold:(float)darkLightThreshold strongLightThreshold:(float)strongLightThreshold;

Set whether to perform brightness detection during liveness detection, NO by default. The dark light threshold is 1.899 by default. The strong light threshold is 4.997 by default.

Parameter	Description
enable	Yes indicates brightness detection (too bright, too dark) is turned on and No indicates brightness detection is turned off.
darkLightThreshold	The threshold used to judge whether it is too dark. The value range is [0,6]. If the detection result score is smaller than the threshold, it is considered too dark. The default threshold is 1.899. When it is set to 0, it means that the dark brightness detection is turned off.
strongLightThreshold	The threshold used to judge whether it is too bright. The value range is [0,6]. If the detection result score is larger than the threshold, it is considered too bright. The default threshold is 4.997. When it is set to 6, it means that the bright brightness detection is turned off.

Return value	Description
None	None

- (void)setEyeOpenFilterEnable:(BOOL)enable threshold:(float)threshold;

Set whether to perform eye-opening detection during liveness detection, NO by default. The threshold is 0.47 by default.

Parameter	Description
enable	Yes indicates eye-opening detection is turned on and No indicates eye-opening detection is turned off.
threshold	The threshold used to judge the eye-opening. The value range is [0,1]. If the detection result score is larger than the threshold, it is considered eye-opening. The default threshold is 0.47. When it is set to 0, it means that the eye-opening detection is turned off.

戻り値	説明
なし	なし

- (void)setOcclusionEnable:(BOOL)enable;

Set whether to perform occlusion detection during liveness detection, NO by default.

Parameter	Description
enable	Yes indicates occlusion detection is turned on and No indicates occlusion detection is turned off.

Return value	Description
None	None

- (void)setHackThreshold:(float)threshold;

Set the threshold for liveness detection. Need to be called before start to take effect, if not set, 0.88 by default.

Parameter	Description
threshold	The threshold for preventing spoofing. The range is [0.0,1.0].

Return value	Description
None	None

- (void)setDetectTimeout:(NSInteger)duration;

The maximum detection time allowed for each module, the default value is 10s, the unit is in seconds.

Parameter	Description
duration	The maximum detection time allowed for each module. When it is set to 0, no timeout time is set. The default value is 10s and the unit is in seconds.

Return value	Description
None	None

- (void)setFaceDistanceRateWithFarRate:(CGFloat) farRate closeRate:(CGFloat) closeRate;

Set the judgment conditions for the face distance.

Parameter	Description
farRate	The ratio of face height/width to the short edge of the image. The value can be set between [0.0 - 1.0]. The closer the parameter is to 0, the farther the face is away from the screen. The default value is 0.4. When set to 0, there will be no distance prompt.
closeRate	The ratio of face height/width to the short edge of the image. The value can be set between [0.0 - 1.0]. The closer the parameter is to 1, the closer the face is to the screen. The default value is 0.8. When set to 0, there will be no distance prompt.

Return value	Description
None	None

- (void)setPassConditionMinDuration:(NSInteger)minDuration minFrames:(NSInteger)minFrames;

Set the pass condition for the Silent liveness detection.

Parameter	Description
minDuration	The minimum pass time required for silence liveness detection. The value can be set between [0 - dDuration]. The default is 3s. It is recommended to set it to at least 1ms. 0 indicats no minimum time limit. If it is set to a negative number, it will be set to 0s.
minFrames	The minimum number of frames for silence liveness detection. The default is 4. 0 indicates no minimum frame limit. If it is set to a negative number, it will be set to 0.

Return value	Description
None	None

- (void)inputDataWithSampleBuffer:(CMSampleBufferRef)sampleBuffer faceOrientaion:(STIDSilentLivenessFaceOrientaion)faceOrientation imagePrepareRect:(CGRect)imagePrepareRect;

Liveness detector configuration. Input image for detection.

Parameter	Description
sampleBuffer	Image data for each frame
faceOrientation	Face orientation
imagePrepareRect	Frame of alignment frame

Return value	Description
None	None

- (void)start;

Start the detection.

- (void)stop;

Stop the detection.

- (BOOL)isBrowOcclusionEnable;

Obtain the eyebrow occlusion detection switch status.

Parameter	Description
None	None

Return value	Description
BOOL	YES indicates occlusion detection is turned on, NO indicates occlusion detection is turned off.

- (BOOL)isBlurryFilterEnable;

Obtain the blurriness detection switch status.

Parameter	Description
None	None

Return value	Description
BOOL	YES indicates blurriness detection is turned on, NO indicates blurriness detection is turned off.

- (BOOL)isIlluminationFilterEnable;

Obtain the brightness detection switch status.

Parameter	Description
None	None

Return value	Description
BOOL	YES indicates brightness detection is turned on, NO indicates brightness detection is turned off.

- (BOOL)isEyeOpenFilterEnable;

Obtain the eye opening detection switch status.

Parameter	Description
None	None

Return value	Description
BOOL	YES indicates brightness detection is turned on, NO indicates brightness detection is turned off.

- (BOOL)isOcclusionEnable;

Obtain the occlusion detection switch status.

Parameter	Description
None	None

Return value	Description
BOOL	YES indicates occlusion detection is turned on, NO indicates occlusion detection is turned off.

- (CGFloat)hackThreshold;

Obtain the threshold for liveness detection. Need to be called before start to take effect, if not set, 0.88 by default. If the liveness score is higher than the threshold value, it is judged as a living body, and if the score is lower than the threshold value, detection failed will be displayed.

Parameter	Description
None	None

Return value	Description
CGFloat	The threshold for liveness detection. The return value is -1 when an error occurs or when the call fails.

- (NSInteger)detectTimeout;

Obtain the timeout time.

Parameter	Description
None	None

Return value	Description
NSInteger	Timeout time

- (NSInteger)passMinDuration;

Obtain the shortest detection time that can pass the liveness detection.

Parameter	Description
None	None

Return value	Description
NSInteger	Minimum time

- (NSInteger)passMinFrames;

Obtain the minimum number of detection frames that can pass the liveness detection.

Parameter	Description
None	None

Return value	Description
NSInteger	Minimum number of frames

- (CGFloat)faceFarRate;

Obtain the farthest face distance threshold in the judgment condition.

Parameter	Description
None	None

Return value	Description
CGFloat	Farthest distance threshold

- (CGFloat)faceCloseRate;

Obtain the closest face distance threshold in the judgment condition.

Parameter	Description
None	None

Return value	Description
CGFloat	Closest distance threshold

+ (NSString*)sdkVersion;

Obtain the SDK version.

Parameter	Description
None	None

Return value	Description
SDK version	SDK version

+ (NSString*)libraryVersion;

Obtain the underlying library version.

Parameter	Description
None	None

Return value	Description
Underlying library version	Underlying library version